Step 1 | Filling With Water
Open top part of the bubble counter
Take supplied O-ring out of the bubble counter chamber
Fill the chamber with water*
*We do not recommend mineral oil as it may contaminate your diffuser.
Step 2 | Compression Collars
Remove the compression collar
Feed tubing through the collar
Step 3 | Connecting Tubing
Push the tubing onto the nipples at each end of the bubble counter
Step 4 | Installing O-ring
Install supplied O-ring on the nipple of the needle valve
Step 5 | Installing Bubble Counter
Screw bubble counter onto the needle valve. Tighten firmly to ensure an air-tight seal*
*Check for leaks using soap/water mix once the system is operational.